|
Available Pressure Ranges
1000; 2000; 3000; 5000; 7500; 10,000;
20,000 psi |
 |
|
INSTALLATION |
|
| Honeywell Sensotec's standard "S"
type transducers have straight threads and use an
O-ring for pressure sealing. To get the best seal
with the O-ring on the transducer, the tapped hole
should have the dimensions shown below. For normal
operating temperatures (-65° F to +250° F)
use BUNA-N (black) O-rings. For high temperatures
(250° F to 425° F) use silicone rubber (red).
O-Ring-#11
Max. Torque (For 17-4 PH only) 300 In-lbs. |
|
|
PERFORMANCE |
Pressure Ranges |
1000; 2000;
3000; 5000; 7500; 10,000; 20,000 psi |
|
Non-Linearity and Hysteresis
(max) |
1.0% F.S. |
|
Non-repeatability (max) |
+ /-0.1% F.S. |
|
Output (standard) |
2mV/V |
|
Resolution |
Infinite |
|
ENVIRONMENTAL |
Temperature, Operating |
-65° to 400° F
(-54° to 204° C) |
|
Temperature, Compensated |
70° to 400° F
(21° to 204° C) |
|
Temperature Effect on
Zero (max) |
.01% F.S./ ° F (0.018%
F.S./ ° C) |
|
Temperature Effect on
Span (max) |
.02% Rdg./ ° F (0.036%
Rdg./ ° C) |
|
ELECTRICAL |
Strain gauge Type |
Bonded foil |
|
Excitation (calibration) |
5VDC |
|
Bridge Resistance |
350 ohms |
|
Wiring Code |
Red (+) Excitation
Black (-) Excitation
Green (-) Output
White (+) Output
|
|
Electrical Termination
(std) |
4 twisted leads (5 ft.) |
|
MECHANICAL |
Media |
Gas, Liquid |
|
Overload-Safe |
50% over capacity |
|
Wetted Parts Material |
17-4 PH Stainless |
|
Type |
gauge |
|
Case Material |
17-4 PH Stainless |
|
