Honeywell is the world leader in advanced heating technology. The introduction of the
innovative CM60 series of programmable thermostats confirms our market leading position.
CM61
The CM61 programmable thermostat has been
designed to provide automatic temperature and time control of radiator, cooling and warm
air heating systems. It may also be used for underfloor heating systems. The unit can
directly switch circulating pumps and boilers, motorised zone valves and underfloor
heating actuators. Voltage free contacts enable the CM61 to control systems
operating from 24 to 240v ac.
Intended for applications where the
householder has the same heating needs from day to day, the CM61 features single function
buttons to simplify programming and operation.
The optional optimum start model will
delay the startup of the heating system to the latest possible moment, to avoid
unnecessary energy use, so that the dwelling is comfortably warm by the programmed time.
CM67
The CM67 has all of the same
functionality as the CM61, plus the capability of providing a different heating
programme for each day of the week.
CM61/67 RF
Has been
replaced by the new CM61/67 RF NG
The
product pack will consist of a programmable thermostat and
relay box.
The
user interface and programming of the CM60 RF NG is identical
to the current model.
Two
packs will be available as detailed below:
Y6667D1086
CM67 RF with optimum start – (replaces Y6667C1013 and
Y6667C1021)
Y6661D1074
CM61 RF with optimum start – (replaces Y6661C1019 and
Y6661C1027)
Both
units are supplied with optimum start enabled. If this feature
is not required, it may be disabled by the installer using the
installer set-up mode. A label over the display describes
this.
Each
system pack is pre-bound so no initial binding is required on
site allowing quicker installations.
AUTOMATIC
TIME SET MODULE
The optional Automatic Time Set Module
(ATS) clips to the side of the Programmable Thermostat without the need for any additional
wiring and checks the displayed time once per day by reference to the national time radio
signal from the Rugby transmitter. The time is thus accurately maintained and changes
automatically with the spring and autumn changes from GMT to BST.
REMOTE TEMPERATURE SENSOR
A hardwired room sensor allows the living space temperature
to be sensed with the CM60 fited in a more suitable location: for example, where it is not
easily accessibe to young children.
OUTSIDE
TEMPERATURE SENSOR
A hardwired outsided sensor allows the householder to to
display the outside temperature when required. (This does not provide outside temperature
compensation)
CM30
Designed for the householder who wants the advanced features of
digital technology but prefer the simplicity of analogue control settings, the CM30 series
provides these options, all presented in the stylish Honeywell waveform design.
Available in both 24hr and 7 day
versions, the CM30 series is the ideal programmable thermostat for any independent heating
area, or for supplementary zones such as granny flats or attic conversion.
|
